The best soap dispenser pump top depends on your bottle’s thread size, tube length, finish, and how many replacement pumps you need. For a black finish, the YOSSEE 28 mm black stainless steel pump is a good match; for brushed stainless steel, two YOSSEE options and a two-pack offer alternatives. The Kombucha Company pump is designed for compatible 28/410 salon-size bottles. Measure the bottle neck before choosing: a 28/400 pump is not the same specification as a 28/410 pump.
| Product | Best For | Key Fit Detail |
|---|---|---|
| YOSSEE Black Stainless Steel | Black finish | 26–28 mm; 28/400 |
| YOSSEE Brushed Stainless Steel | Bottle-use replacement | 26–28 mm; 28/400 |
| Top Home Store Two-Pack | Two bottles or a spare | 28/400; 2 cc per press |
| The Kombucha Company Two-Pack | Salon-size bottles | 28/410 |
| YOSSEE Brushed Pump With Tube | Adjustable tube length | 26–28 mm; 28/400 |
YOSSEE Black Stainless Steel Pump
This replacement top is best for someone matching a black dispenser or wanting a pump head described as resistant to greasy fingerprints. Its AISI 304 18/10 stainless steel construction is identified as corrosion-resistant, and the listed bottle thread range is 26–28 mm, or standard 28/400. The 22 cm tube can be cut if it is too long for the bottle.
Why choose it: It combines a black finish with a stated cut-to-fit tube. Check before buying: Confirm the bottle thread measurement; a similar-looking opening does not guarantee a fit.
YOSSEE Brushed Pump For Bottles
This brushed stainless steel pump is best for replacing the top on a bottle-based dispenser when appearance across different bottle materials matters. The listing says it fits bottles made of plastic, glass, ceramic, or metal, provided the thread is 26–28 mm (standard 28/400). It is designed for bottle use rather than sink-mounted or built-in dispensers.
Why choose it: The stated fit range and bottle-material options make it a flexible choice for many countertop bottles. Limitation: The listing does not provide a tube length, so check the product details if tube reach is important.
Top Home Store Brushed Nickel Two-Pack
This two-pack is best for replacing two pumps or keeping a second pump available. Each pump is listed with a 2 cc output per press, a 9-inch tube that can be trimmed, and a 28/400 bottle neck fit. The listing describes 304 stainless steel construction, an internal stainless steel spring, and a glass ball valve.
Why choose it: It offers two pumps and specifies the output amount and tube length. Check before buying: The product is intended for a 28/400 neck, approximately 28 mm; measure the bottle rather than relying only on its appearance.
The Kombucha Company 28/410 Two-Pack
This two-pack is best for compatible 1-liter or 33.8-ounce bottles used for shampoo, conditioner, lotion, or soap. Its key distinction is the 28/410 thread specification, which differs from the 28/400 fit listed for the other products here. The pump head is approximately 2.32 inches long and 1.18 inches wide, with an ergonomic design described for comfortable dispensing.
Why choose it: It is specifically presented for salon-size containers and provides two pumps. Limitation: It requires a 28/410 bottle neck; do not assume it fits a 28/400 bottle.
YOSSEE Brushed Stainless Steel With Tube
This YOSSEE replacement is best for shoppers seeking a brushed finish and a tube length they can adjust. The listing specifies AISI 304 18/10 stainless steel, a 26–28 mm bottle thread range, and standard 28/400 sizing. Its 22 cm tube can be cut if it is longer than needed.
Why choose it: The listed material and trimmable tube help address finish and bottle-depth needs. Check before buying: Measure the neck and tube depth; this pump is listed for bottle dispensers, not as a universal fit for every dispenser.
Buying Guide: How To Choose A Soap Dispenser Pump Top
What thread size does your bottle need?
Start by measuring the bottle’s threaded neck or checking the container specifications. Several options above list a 28/400 fit and a 26–28 mm range. The salon-size pump lists 28/410 instead. Those thread codes are distinct, so match the bottle to the pump specification rather than choosing based on nominal diameter alone.
How long should the tube be?
A tube needs to reach the liquid near the bottom of the bottle while allowing the pump to screw on properly. The YOSSEE products with stated tube lengths include 22 cm tubes that can be trimmed. The Top Home Store pumps include 9-inch tubes that can also be trimmed. Check the bottle depth before cutting, since a tube that is too short may not reach the remaining soap.
Which finish and pack size make sense?
Choose black or brushed stainless steel based on the look of the existing dispenser and the surrounding fixtures. A two-pack can suit two bottles or provide a spare, while a single replacement may be sufficient for one dispenser. Compare listed construction and features, but do not assume that finish alone confirms the pump’s material or fit.
Frequently Asked Questions
How do I know whether a replacement pump top will fit?
Measure the bottle neck and compare its thread specification with the pump listing. Check both the diameter range and thread code, such as 28/400 or 28/410.
Can I trim a replacement pump tube?
The listed YOSSEE tubes and Top Home Store tubes are described as trimmable. Follow the product instructions and measure the required length before cutting.
Are these pumps suitable for built-in sink dispensers?
The YOSSEE brushed pump listing says it is designed for bottle use and is not compatible with sink-mounted or built-in dispensers. Check each product’s fit details before purchasing for a built-in unit.
What is the difference between 28/400 and 28/410?
They are different thread specifications. Match the pump’s listed thread code to the bottle; a stated 28 mm diameter by itself does not establish compatibility.